Looking For Solutions?
Call Us Now
(503) 746-5807
7035
Model 7035 Automatic Termination & Drying System
with Paste Temperature Control
The 7035 is fully automatic chip termination and drying system which is optimized for small chip components. Chips are placed into the bulk feeder, then loaded and inserted into the patented Soft Grip Belt.
The first side is terminated and dried, then transferred to the other side of the Soft Grip Belt, where the second side is terminated and dried, Chips are then ejected into a container and ready for termination firing. Dipping programs are menu driven and can be quickly selected by the operator.
The 7035 Termination System includes:
- High throughput software
- Automatic Termination & Drying System with Paste Temperature Control
- Soft handling of parts with Debris Separation and Precision Dipping
- Small footprint, Low tooling cost & Microprocessor controlled
- Chip Loading Smart Press
- Air knife
- Smart press sensor and software
- New chip vacuum pump
- Positive position stop load press arm
- Upper paste wheel motor cooling fan
- Solvent exhaust manifold thermal blanket
- Belt alignment and support guides
- New doctor blade design, kinematic ball mount
- Improved small chip drive pulley
- Line conditioner and/or regulated power supply
- Paste temperature control
Positional Accuracy of Doctor Blade:
+/- 0.0002 in. (5.1 microns)
The 7035 is a fully automatic chip termination and drying system, which is optimized for small chip components. Chips are placed into the bulk feeder, then loaded and inserted into the patented Soft Grip Belt.
The first side is terminated and dried, then transferred to the other side of the Soft Grip Belt, where the second side is terminated and dried, Chips are then ejected into a container and ready for termination firing. Dipping programs are menu driven and can be quickly selected by the operator.
Throughput* (dip only):
0402 (1005) 225K chips per hour
0403 (1008) 186K chips per hour
0504 (1210) 186K chips per hour
0603 (1608) 186K chips per hour
0805 (2012) 68K chips per hour
1206 (3216) 55K chips per hour
1210 (3224) 35K chips per hour
Physical Dimensions:
Length: 84 inches (213cm)
Width: 27 inches ( 69.0cm)
Height: 62 inches (158cm)
Floor Space: 23.5 sq. ft. (2.2 sq. m)
Net Weight: 1440 lb. (653 kg)
Shipping Weight: 1660 lb. (753 kg)
Drying Ovens:
Temperature range: Ambient to
400°F (204° C)
Length - 32 in. (81.3 cm.)
Zones per oven: Two
Ovens per machine: Two (upper & lower) with continuous solvent exhaust.
Power:
220 V, 50-60 Hz, 3-phase 515 kW Standard, other voltages as required
Paste Requirements:
9.3 oz. (260g.) per Reservoir, Four Reservoirs per Machine
Tooling Required
(for one chip size/thickness):
One load wheel, one soft grip belt*, four pin assemblies
Bulk Loader Capacity:
75 cu. in. (1,229 cu. cm.)
Compressed Air:
Dry, Oil Free
70 psi (5kg/sq. m)
0.5 cfn (0.14 cu. m/min)
Paste Temperature Control:
+/- 1°C