Mon - Fri 7:00 AM to 5:00 PMadmin@chipstartech.com(503) 746-5807
Submit an Inquiry

Looking For Solutions?
Call Us Now

(503) 746-5807

Menu

7037

Model 7037 Automatic Termination and Drying System           with Paste Temperature Control

Model 7037

 

The 7037 is a fully automatic chip termination and drying system which is optimized for small chip components. Chips are placed into the bulk feeder, then loaded and inserted into the patented Soft Grip Belt and further positioned with the position press.

The first side is terminated and dried, then transferred to the other side of the Soft Grip Belt, where the second side is terminated and dried. Chips are then ejected into a container and ready for termination firing. Dipping programs are menu driven and can be quickly selected by the operator.

The 7037 Termination System includes:

-  High throughput software

-  Air knife

-  Smart press sensor and software

-  New chip vacuum pump

-  Positive position stop load press arm

-  Upper paste wheel motor cooling fan

-  Solvent exhaust manifold thermal blanket

-  Belt alignment and support guides

-  New doctor blade design

-  Improved small chip drive pulley

-  Line conditioner and/or regulated power supply

-  Paste temperature control

Production Capacity  (dip only):

0402 (1005) 120K chips per hour

0403 (1008) 95K chips per hour

0504 (1210) 85K chips per hour

0603 (1608) 95K chips per hour

0805 (2012) 85K chips per hour

1206 (3216) 55K chips per hour

1210 (3224) 35K chips per hour

1812 (4832) 25K chips per hour 

Tooling Changeover Time:

Approximately 10 minutes

Floor Space Required:

23.5 sq. ft. (2.2 sq. m.)

Paste Requirements:

100 ml per reservoir four per sys.

Weight:

Net-approximately 1440 lb. (653 kg.)
ship-approximately 1660 lb. (753 kg.)

Dimensions:

Length 125 inches (317.5cm)
width 27 inches ( 69.0cm)
height 48 inches (121.9cm)

Utilities:

208v, 240v, 50-60 Hz, 3 phase, 5.5 kw standard, other voltages as required by customer, compressed air (dry, oil free), 70 psi (5 kg./sq. m.), 0.5 cfn (0.14 cu. m./min.)

Paste Temperature Control:

+/- 1° C

Positional Accuracy of Doctor Blade:

+/- 0.0005 in. (12.5 microns)

Bulk Loader Capacity:

75 cu. in. (1,229 cu. cm.)

Tooling Required

(for one chip size/thickness):

One load wheel, one soft grip belt, four pin assemblies

Drying Ovens:

Temperature range - room temperature to
400°F (204°C) length - 64 in. (162.6 cm.) two zones per oven, four ovens per machine (two upper and two lower) with continuous solvent exhaust.